Installation of RAM in Computer

Most of the time when you do various work with your computer at a same time like you are working with large files or many programs at once your computer slows down so you need to increase the performance of computer and this will done by installing extra RAM i.e.Random Access Memory. 

So, question is arise how to install a RAM??......No problem below is the small description about installation process of RAM.

Installing RAM is a very simple task. The main thing is that you have to know:

• What kind of RAM you need.
• How much RAM you have
• How much RAM you wish to add
• Form factor
• RAM type
• Tools needed
• Warranty
• Where it goes

1. Firstly you have to determine what kind of RAM you need, and whether your computer has enough open slots to hold it. One more thing the new RAM should match the existing RAM's specifications and configuration.
2. Shut down the computer and leave it plugged into the surge suppressor.
3. Disconnect all the peripheral devices that is all the input output devices like the monitor, keyboard, mouse etc. from the computer.
4. Remove the cover of the computer.
5. Ground yourself to the computer with professional grounding equipment like an anti-static wristband or hold a metal part of the chassis.
6. Remove any cards or internal components necessary to give yourself unobstructed access to RAM sockets.
7. Pick up your SIMM that is single in-line memory module or DIMM that is dual in-line memory module by the ends without touching pins or chips.
8. If adding a SIMM, find the notched end and turn the SIMM so that it is parallel to the existing RAM card. Insert the SIMM or DIMM into the socket. 
9. Use slight pressure to keep a SIMM from backing out while rotating the module to an upright position perpendicular to the motherboard.
10. To be very careful when you insert a SIMM or DIMM. Make sure that the small holes on each side of a SIMM fit into holders.
11.  Try to pull the module out to ensure it is locked in position.
12. Replace all the internal components.
13. Leave the cover off and reconnect the monitor, keyboard and mouse.
14. Now turn on this new computer setup.
15. Check the amount of RAM by right-clicking the My Computer icon in and choosing Properties.
16. If you don't see the right amount of RAM, turn off your computer and try "reseating" the SIMM or DIMM and reboot. 

By doing the above processes you can easly install RAM into your computer and the performance of  computer will increase.